Archive 2 » View All » Roadster » Honda S2000 (2004-2006)

Honda S2000 (2004-2006)

2004 Honda S2000

The Honda S2000 is a high-performance, 2-seat, open-topped roadster with an advanced front-engine, rear-wheel-drive sports car configuration. Introduced in 2000 as a commemoration of Honda’s 50th anniversary, the S2000 incorporates many of the lessons learned in the company’s five decades of building and racing cars and motorcycles. Its original concept was to be a true sports car that could serve as both a practical and fun daily driver and a highly capable weekend track racer.

For its 2004 redesign, Honda engineers built on those ideals and elevated the S2000 to a higher class by strengthening the all-around performance, enhancing the interior and giving the exterior a subtly bolder appearance. The net gain is an S2000 that is simultaneously an improved track car and an improved daily driver.

The 2004 S2000 benefits from the following major enhancements:

  • Larger displacement 2.2-liter engine (240 horsepower @ 7800 rpm and 162 lb.-ft. of torque @ 6500 (replaces 240 hp @ 8300 rpm and 153 ft.-lbs. @ 7500 rpm )
  • Larger wheels and tires (17-inch)
  • Revised suspension tuning
  • Revised transmission gear ratios and improved shift feeling
  • Bolder front and rear exterior styling
  • Freshened interior design
  • New options including XM Satellite Radio™ and headrest speakers

On the track, the 2004 S2000 accelerates with increased authority and more pull through corners with a broadened powerband that comes on sooner and stronger. The new suspension tuning enhances vehicle control qualities at the limit, while minimizing bump steer effects from road disturbances. Larger 17-inch wheels and tires provide more grip and maximize the suspension tuning.

From 1000 rpm to 8000 rpm, available torque and horsepower increase between 6- and 10-percent. Additionally, useful power for high performance acceleration begins at about 3000 rpm compared to about 6000 rpm on the 2000 – 2003 models. This performance improvement at the lower rpm ranges can be attributed to the displacement increase, revised valvetrain tuning and the lower gear ratios on gears one through four that help magnify the engine performance gains.

On the street, the 2004 S2000 transmits less ride harshness, while the enhanced powerband reduces the need to shift as often in certain circumstances. Interior comfort also improves with more elbow and shoulder room, and the center console now has two cupholders, a storage tray and more utility.

The sum of the entire series of changes produces significant results on a platform that sets an industry standard for precision and performance. In short, the 2004 S2000 sports a new muscular feel, refined handling and enhanced interior comfort with better convenience features while maintaining its focus as a true high performance sports car.

2004 S2000 Improvements

Performance and Handling

  • Dynamic acceleration potential increased
  • Transmission shifter direct feel increased
  • High-speed stability enhanced
  • At-the-limit performance increased with more gradual fall-off
  • Sensitivity to disturbances decreased (less bump steer)
  • Steering feedback enhanced
  • Brake pedal dynamic feel enhanced

Comfort and Convenience

  • Interior space increased
  • Interior storage functionality increased
  • Optional audio features added

2004 Honda S2000 vs. 2003 Honda S2000

2004 2003 Change/Notes
Powertrain
Engine 2.2-liter DOHC VTEC 2.0-liter DOHC VTEC + 0.2 liters, attributable to engine stroke change
Horsepower 240 @ 7800 rpm 240 @ 8300 rpm + 0 hp @ -500 rpm, same peak horsepower with overall powerband characteristics strengthened 4% to 10% between 1000 -8000 rpm
Torque (lbs.-ft.) 162 @ 6500 rpm 153 @ 7500 rpm +9 lb.-ft. @ -1000 rpm with improved powerband characteristics strengthened between 4% and 10% between 1000-8000 rpm. Max torque increases 5%.
Rev Limit (fuel cutoff) 8200 9000 Piston travel configuration decreases rpm limit by 9% because of piston speed increase.
Compression Ratio 11.1:1 11.0:1 +0.1:1
Transmission Ratios Reconfigured
Gears 1-4 = 4% lower for performance
Gear 5 = 1% lower
Gear 6 = 2% higher
Suspension
Wheels (inches) Front: 17×7
Rear: 17×8.5
Front: 16×6.5
Rear: 16×7.5
Front: + 1×0.5 (new wheel design)
Rear: + 1×1 (new wheel design)
Tires Front: P215/45R17
Rear: P245/40R17
Front: P205/55R16
Rear: P225/50R16
Larger contact patch
Springs New Tuning
Front: Increased spring rate 6.7%
Rear: Decreased spring rate 10%
Shock Absorbers New Tuning
Tuned for new suspension settings
Stabilizer Bars (mm) Front: 26.5x t4.5
Rear: 25.4 x t4.5
Front: 26.5x t4.5
Rear: 27.2 x t4.5
Front: Same
Rear: -1.8 x 0
Ride Height Non-Load: 5.1
Full-Load: 4.2
Non-Load: 5.1
Full-Load: 4.2
No Change
Body
Aerodynamics Enhanced
5% improvement in Cd from new front bumper design
Body Rigidity Enhanced
Rigidity increased
Front Bumper Redesigned
New bumper and new triple-beam headlight designs
Rear Bumper Redesigned
New bumper, triple beam LED taillights and oval exhaust tips designs
Weight (lbs.) 2835 2811 +24, attributable to body rigidity increase and new wheels and tires
Exterior Dimensions
L x W x H (inches)
162.2 x 68.9 x 50.0 162.2 x 68.9 x 50.0 0 x 0 x 0
Interior
Shoulder Room (in.) 50.7 48.4 +0.9 (20mm)
Interior Console Redesigned
New console with two cupholders (+1) and storage compartment, new trim pieces
Interior Doors Redesigned
Increased elbow and shoulder room, new speaker enclosures
Steering Wheel Minor update
New Honda emblem
Radio New design
XM Satellite Radio available and optional headrest speakers added

The 2004 S2000 engine has been re-designed and displacement increased by 0.2 liters through lengthening the stroke of piston travel. The 2.2-liter, DOHC VTEC 4-cylinder engine produces 240 horsepower and 162 lb.-ft. of torque while meeting California’s Low-Emission Vehicle (LEV) standards. Honda’s innovative VTEC advanced variable valve-timing system, operates the S2000 engine’s 16 valves (4 per cylinder) in both intake and exhaust modes. This system is compact and tailored to the high-output, high-rpm operating characteristics of the S2000 engine.

A revised 6-speed, manual transmission provides lower gear ratios on gears one through five, and a higher sixth speed gear for highway cruising The transmission is a compact design and features a direct shift linkage with class-leading feel and short throws. A Torsen limited-slip differential smoothly delivers power to the rear wheels, regardless of traction conditions. The S2000 engine and transmission are capable of accelerating the S2000 from 0-60 mph in less than six seconds.

Honda’s racing experience is also evident in the S2000’s responsive handling. The chassis has an ideal 50/50 weight distribution, and the body and frame are a hybrid monocoque-frame structure that forms a rigid, flex-free platform for the S2000’s in-wheel double wishbone suspension system, and plays an important role in helping the S2000 achieve its high level of safety protection. The power steering system is a highly responsive, electrically assisted type.

Larger front 215/45 87W and rear 245/40 91W tires are mounted on newly-designed 17-inch alloy wheels, and 11-inch brake discs (vented in front) provide excellent stopping power and brake feel. For 2004, new brake pad material improves the pedal feel and resists fading in high performance driving. An anti-lock braking system is standard.

The exterior styling of the S2000’s body is angular, modern and purposeful, with the 2004 model receiving bolder front end and rear end styling. Its long hood and flared front fenders create the impression of lowness and mass. The nose has slightly improved aerodynamics for 2004 that involves re-shaping the front bumper. High sides reinforce the cockpit-like feel of the interior.

The interior is modern and designed with the driver’s needs in mind. The seats contour to provide excellent lateral support during aggressive turns and help minimize fatigue. Outward visibility is unobstructed.

For 2004, controls such as the steering, brakes and clutch, operate with a new level of precision and have an even more direct feel. The aluminum leather-wrapped shift knob and lever, F1-inspired digital instrument display and separate engine-start button serve as a reminder of the racing heritage of the S2000.

2004 Honda S2000 Roadster Technical Highlights

Advanced technologies used in the S2000:

  • Hybrid monocoque body and “high X-bone frame” has torsional and bending rigidity of closed-top vehicle, without excess weight
  • Highly compact, 2.2-liter, DOHC VTEC engine produces 240 hp and 162 lb.-ft. of torque
  • Compact DOHC three-rocker VTEC variable valve-timing system adjusts intake and exhaust valve duration
  • Coaxial, roller-bearing cam followers
  • Lightweight, powdered-metal, injection-molded, sintered steel-alloy cam followers
  • Electric Power Steering system (EPS)
  • F1-inspired digital instrument panel
  • High-efficiency, low-back pressure, metallic-honeycomb catalyst
  • In-wheel, 4-wheel double wishbone suspension system
  • Impact-absorbing body and frame designed to help protect the driver and passenger in full-frontal, offset-frontal, side and rear impacts
  • 6-speed, transmission
  • Forged-alloy pistons and “dummy head” honed cylinder block
  • Heat-treated, carburized forged-steel crankshaft and connecting rods
  • Nut-less connecting rods
  • High-intensity discharge (HID) projector headlights
  • Torque-sensing limited-slip differential
  • Long-wearing FRM (Fiber-Reinforced Metal) cylinder liners
  • Compact “in-wheel” double wishbone suspension system
  • Engine meets Low-Emission Vehicle (LEV) standards

2004 Honda S2000 Gallery

S2000 Power and Convenience Features

The S2000 has an impressive list of standard comfort and convenience features, designed to make driving more pleasant and enjoyable, including high-intensity discharge (HID) projector headlights, a power-operated convertible top that opens or closes in approximately six seconds, air conditioning, micron air filtration, cruise control, an AM/FM stereo with CD player, remote-operated audio controls, power door locks, power windows, power heated side mirrors, Immobilizer Theft-Deterrent System and keyless entry for both doors and the trunk. For 2004, XM Satellite Radio and headrest speakers are available as optional.

Safety Features

The S2000 is designed to comply with various worldwide safety standards and boasts an extensive list of safety features, including 3-point seat belts with load limiter and pretensioner, a compact SRS system for the driver and passenger, roll bars and reinforced windshield posts, and a body and frame especially designed to help absorb the energy of full-frontal, offset-frontal and rear impacts. Even the hood hinges and windshield-wiper pivots are designed to collapse in order to minimize head injury to pedestrians. Anti-lock brakes (ABS) are standard.

High-Output 2.2-Liter Engine

In order to give the S2000 an ideal 50/50 weight distribution and a low yaw moment, Honda engineers designed the S2000’s 2.2-liter, 240-hp, 16-valve, 4-cylinder engine to be as small and as lightweight as possible. The engine’s aluminum-alloy cylinder head is a highly efficient design and features a compact gear- and chain-drive system for the dual overhead camshafts. The ancillary drive system for the alternator, water pump and air-conditioning compressor is also a new space-efficient type.

The S2000 engine’s highly rigid, aluminum-alloy cylinder block features Honda’s long-wearing FRM (Fiber-Reinforced Metal) cylinder liners. The lightweight pistons are made of forged aluminum alloy and the forged-steel connecting rods and crankshaft are heat-treated for added toughness. Numerous friction-reduction techniques, such as, roller-bearing cam followers, special pistons and advanced bearing materials, are used in the engine.

A compact version of VTEC (Variable Valve Timing and Electronic Engine Control), Honda’s variable valve timing system, is used on the S2000 engine. The VTEC system optimizes torque output over the engine’s entire operating range, improving both driveability and performance. The S2000’s VTEC uses compact, high-strength, low-friction, roller-bearing cam followers.

A large-capacity, low-restriction intake system and low back-pressure exhaust system help ensure free breathing at all engine speeds. The exhaust system uses a high-efficiency metal-honeycomb catalyst. The new catalyst, combined with the engine’s electric pump-fed, secondary air-injection system, a direct-ignition system and Honda-programmed multi-point fuel injection, contributes to the S2000’s engine achieving its LEV status.

Six-Speed Manual Transmission

The S2000 uses a longitudinally mounted, 6-speed manual transmission, which is built for high performance. Its gearing ensures strong performance in every gear, and the shift linkage is very direct, with short, precise throws. For 2004, single carbon synchronizers on all forward gears replace double- and triple-cone brass synchronizers in order to provide a more direct shift feel and reduce mechanical loss in the transmission. Other features of the S2000 drivetrain include a compact pull-type clutch with a clutch delay system, a highly rigid, one-piece propeller shaft and rigid axle shafts-all designed to reduce drivetrain flex to an absolute minimum. The Torsen limited-slip differential is a highly efficient torque-sensing, clutchless type that smoothly transfers torque to the wheel with the most traction, whether cornering or accelerating in a straight line.

In-Wheel Double Wishbone Suspension

The S2000’s 4-wheel double wishbone suspension system is a compact in-wheel design, similar to the type used on racing cars. At each wheel, rigid upper and lower A-shaped wishbone links carry suspension loads directly to rigid subframes, attached directly to the newly reinforced monocoque body.

For 2004, the suspension geometry has been carefully tuned for optimum road-holding and steering feel. Coil springs and mono-tube, gas-pressurized shock absorbers (remote reservoirs in the rear) are used at each wheel. Front and rear stabilizers (1.04 x 0.18-inch front/1.00×0.18-inch rear) help keep body roll to a minimum.

High X-Bone Frame

Body rigidity is crucial to good handling in an open-topped roadster, so Honda engineers designed a highly rigid monocoque body for the S2000 and strengthened it even more for 2004. The heart of the system is a large central tunnel that runs down the center of the cockpit. This tunnel serves as the backbone and main load-bearing structure for the vehicle, as well as a housing for the transmission and driveshaft.

The body’s high side sills, and innovative diagonal (X) bracing at the front and rear of the cockpit, provide additional rigidity. Suspension and drive loads from the wheels are fed directly into this structure via highly rigid subframes at the front and rear of the vehicle.

Electrically Powered Steering System

In place of a conventional hydraulic system, with its hoses, fluid and power drain, the S2000 uses an electrically assisted power steering system. At low speeds, more power-steering assist is provided, which eases maneuvering and parking. As vehicle speed increases, less power assist is supplied, giving the steering a more direct feel.

The S2000 Concept and Development

When Honda designers and engineers began work on the S2000, they set several overall design goals for it that would ultimately define its nature. They wanted it to have race-car-like performance and handling-something an enthusiast driver could use and enjoy, even in everyday driving situations. In addition, they wanted the S2000 to be a modern, socially responsible automobile, with low emissions and a full range of safety features.

The S2000’s roadster layout also captures the spirit of the legendary high-performance sports cars of the past, as well as Honda’s very first sports car, the S500 roadster. However, the S2000 makes no attempt to be a retro sports car. It is Honda’s own unique interpretation of a modern sports car-with high performance, state-of-the-art technology, comfort, style and Honda durability.

The S2000 and the Honda Spirit

The S2000 is also intended to be a celebration of several important aspects of the Honda Motor Company’s corporate identity and spirit. One aspect of that spirit can be found in the company’s history of building sporting automobiles.

From the first S500 to the current Civic Si and the Acura NSX supercar, Honda has always offered a dedicated performance car. Another aspect of the Honda spirit celebrated in the S2000 is the company’s motor sports heritage. Honda started racing motorcycles internationally in the 1950s, and entered Formula 1 car racing in the 1960s. Today, Honda still participates in the most competitive and prestigious levels of motor sports, including Formula 1, the Indy Racing League and Grand Prix motorcycle racing. The S2000 incorporates many of the engineering lessons learned in five decades of racing.

The S2000 also represents the Honda spirit of innovation. From the first CVCC engine to 4-wheel steering, VTEC variable valve timing, and up to the current SULEV, AT-PZEV and ZEV hydrogen fuel cell automobiles and engines, Honda products have always demonstrated the company’s uniquely creative approach to solving engineering challenges. The S2000 is no different. It is a showcase of Honda technologies and advanced engineering techniques applied in a cost-effective manner.

Honda S2000 Features

The following is a list of the standard features found on the S2000 roadster:

Engineering Features

  • 240-hp, 2.2-liter, 16-valve, DOHC VTEC engine
  • Multi-Point Programmed Fuel Injection (PGM-FI)
  • Direct ignition system
  • Low-back pressure exhaust system with high-efficiency catalyst
  • Low-Emission Vehicle-rated (LEV)
  • 6-speed, manual transmission
  • Torque-sensing limited-slip differential
  • Power-assisted 4-wheel disc brakes with ABS
  • High-rigidity “high X-bone frame”
  • In-wheel double wishbone suspension with gas-filled shock absorbers and front and rear stabilizer bars
  • Electric Power Steering system (EPS)
  • Variable-ratio rack-and-pinion steering
  • 17-inch alloy wheels (7.0-inch-wide front/8.5-inch-wide rear)
  • 215/45 R17 87W front tires
  • 245/40 R17 91W rear tires

Exterior Features

  • Electrically powered soft top
  • Aluminum hood
  • High-intensity discharge (HID) projector headlights
  • Body-colored dual power mirrors
  • Dual-outlet exhaust with oval tips
  • 5-mph, impact-absorbing body-colored bumpers

Interior Features

  • Dual airbags (SRS)
  • Air conditioning
  • Micron air-filtration system
  • AM/FM stereo with CD player and XM Satellite Radio capability
  • Remote-operated audio controls
  • Power windows
  • Power door locks
  • Cruise control
  • Digital instrument panel
  • Leather-trimmed seats
  • Center console storage compartments with sliding lid
  • Dual Beverage holder
  • 3-point seat belts with pretensioner and load limiter
  • Engine start button
  • Immobilizer Theft-Deterrent System
  • Keyless entry system for doors and trunk

Exterior and Interior Colors

  • Grand Prix White/Light Tan
  • New Formula Red/Black
  • Sebring Silver Metallic/ Black or Black and Red
  • Silverstone Metallic/Black or Black and Red
  • Berlina Black/Black
  • Rio Yellow Pearl/Black
  • Suzuka Blue Pearl/Blue

2004 Honda S2000 — Interior

As with the S2000’s exterior, the central design theme of the roadster’s interior is performance. Honda engineers designed the interior to contribute to what they call an “interfusion” between the driver and the car.

The conceptual model for the S2000 interior is a modern Formula 1 car’s cockpit. Outward visibility, simplicity of controls, control feel, comfort – both machines have these needs in common.

New for 2004

The 2004 S2000 benefits from a wide range of interior enhancements that make it a better all-around daily driver. Redesigned door panels provide more shoulder and elbow room, and a new center console provides greater utility and improved audio.

Honda S2000 Interior Features

  • Driver-oriented control layout
  • Excellent outward visibility
  • Dual airbags (SRS)
  • Air conditioning
  • Micron air-filtration system
  • AM/FM stereo CD player with optional XM Satellite Radio
  • Power windows
  • Power door locks
  • Power mirrors
  • Cruise control
  • Digital instrument panel
  • Leather-trimmed seats
  • Center console storage compartments w/lock
  • Center console cupholders (2) w/ one touch sliding lid
  • 12-volt power outlet
  • 3-point seat belts with pretensioner and load limiter
  • Remote-operated audio controls
  • Immobilizer Theft-Deterrent System
  • Engine start button
  • Keyless entry system

2004 Interior Changes

The interior has the following changes for 2004:

  • Door panels on both sides are sculpted more deeply
    • Elbow room increased by as much as 0.9 inches (20 mm)
    • The lower door pocket has more storage space,
    • The tweeter housing is reshaped and more integrated with the door shape
    • Vertical elbow pad is larger
  • New interior trim and related pieces include:
    • Ignition wave key design features decorative aluminum-look panel with S2000 logo
    • An aluminum shift knob with genuine leather
    • A genuine leather shift boot
    • Revised aluminum-look radio lid
    • Aluminum-look console lid, head restraint cover
    • Cruise control buttons on steering wheel add Cancel center button
  • Center console redesigned to provide:
    • Two cupholders (previously just one)
    • A one-touch sliding lid
    • A storage tray to place small objects such as coins
  • Updated instrument panel meter design
    • Digital tachometer features less distance between segments
    • Integrated clock added
    • Security indicator lamp added
  • New black and red interior color is available with Sebring Silver Metallic or Silverstone Metallic exterior colors

Driver-Oriented Interior

The S2000’s driver-oriented interior is stylistically restrained and functional.

The contoured seats are upholstered in leather, and have a perforated texture that helps the material breathe. Legroom is ample and the seatback’s side bolsters extend all the way up to the shoulder for good lateral support when cornering. The head restraints are fixed and feature an open design that contributes to the overall open feel of the cockpit.

Seat adjustment is manual and includes adjustments for fore and aft position and seatback angle. A padded and carpeted central console separates the seats. The sculpted door inserts are upholstered in leather and include an armrest, grab handle, door latch, power window and door-lock controls. The driver’s side door includes power-mirror controls.

The instrument panel curves around each side of the central instrument pod. Smaller pod wings house controls for heating, ventilation, air conditioning, audio, cruise control, the engine start button and the air outlets.

The foot pedals feature a textured-metal finish reminiscent of the pedals found in race cars, and are positioned for optimal heel-and-toe operation.

The padded 3-spoke steering wheel features the cruise control switches with set, resume and cancel buttons.

The 6-speed shifter, emergency flasher switch, hand brake lever and power-operated soft-top switch are housed in the central console, along with beverage holders and a pocket for small items, such as change. A compartment located on the rear bulkhead, between the driver’s and passenger’s shoulders, features a hinged, locking cover and functions as a glove compartment. Two lockable storage units are located behind the driver’s and passenger’s seats.

Audio System

The AM/FM stereo and CD player sits beneath the center of the instrument panel, at the forward end of the center console. A flip-down cover hides the radio controls from view and from the elements. The 30-watt, four speaker system features two front mid-range speakers in the lower door panel and two tweeters mounted on the upper door.

For 2004, dealer-installed headrest tweeters are available (two per seat) and the head unit is XM Satellite Radio-capable with the addition of a dealer-installed XM Satellite Radio Receiver and antenna. The optional satellite antenna has a sleek, low-profile design and is painted Satin Silver Mist. For a monthly fee, XM Satellite Radio features over 100 digitally broadcast channels and delivers CD-quality sound with text information such as artist, song title and album title.

Immobilizer Theft-Deterrent System

An Immobilizer Theft-Deterrent System is standard on the S2000. The ignition key has a built-in transponder, which, when removed, immobilizes the engine fuel injection and ignition so the engine cannot be started. When the key is inserted, a radio signal from the ECU (Electronic Control Unit) is sent to the transponder.

If the code in the key and the code in the ECU agree, then the ECU allows the engine to be started. The key needs no batteries, as it receives what little energy it needs via the ignition/steering-lock unit that functions as a transmitter/receiver antenna. An indicator lamp on the instrument panel lets the driver know that the immobilizer system has accepted the key.

Race-Car-Type Digital Display

The S2000 features a digital instrument panel reminiscent of the displays used in modern racing cars. The display features a large, semicircular bar-type tachometer divided into 100-rpm increments. The tachometer flashes red when the engine redline is approached at 8000 rpm (the fuel cutoff is set at 8200 rpm). A highly visible digital speedometer readout is below the tachometer display, as well as readouts for coolant temperature, fuel level, trip and cumulative mileage odometers and warning lights for SRS, oil pressure, the Immobilizer Theft-Deterrent System and ABS. For 2004, the tachometer features reduced distance between each segment. Plus, a digital clock and a security system indicator lamp have been added.

Electronically Controlled Heating and Air-Conditioning System

The various functions of the heating and air-conditioning system are electronically controlled and actuated by the heater and airflow controls. The heater outlets at knee level and the center outlet in the instrument panel help extend comfort when the top is down in cool weather. The air-conditioning-system evaporator is a new design that takes up less space, is more efficient at transferring heat and has greater corrosion resistance.

Micron Air-Filtration System

The S2000 air-conditioning system features a replaceable micron air filter capable of filtering particulate matter from 8.0 microns (the size of most pollen) down to as small as 0.3 microns (diesel emissions).

S2000 Safety Systems

The driver’s and passenger’s SRS (Supplemental Restraint System) both use a compact airbag that fits the S2000’s small steering wheel and instrument panel. The lower anchor points for the S2000’s 3-point, auto-locking seat belts are at the side sill and seat. The upper anchor bolts to a bracket mounted directly on the S2000’s rollbars.

The S2000 body and the highly rigid high X-bone frame’s central tunnel, straight front and rear side members, side sills and floor frame are designed to form a strong three-point support structure that distributes loads evenly. The resulting body structure boasts the rigidity and passenger protection of a closed-top vehicle in full-frontal and rear impacts. Even though open-topped cars are exempted, the S2000 meets the federal standard for occupant protection in a rollover accident. The driver’s and passenger’s roll bars are made of 1.5-inch diameter high-strength steel pipe with a 0.08-inch wall thickness, and tied directly into the frame. Protection is provided by reinforced door pillars, windshield posts and the windshield frame.

The S2000 incorporates pedestrian injury-reducing technol-ogy in the form of collapsible hood hinges and windshield-wiper pivots, designed to help minimize the chances of head injury to a pedestrian in a collision.

2004 Honda S2000 — Body

The S2000 is an open-topped, two-seat roadster, designed for enthusiast drivers. The S2000 uses steel body construction with the exception of the hood, which is aluminum. The S2000 body and interior also incorporate class-leading safety, quality and comfort features.

New for 2004

A freshened exterior appearance gives the 2004 S2000 a more powerful appearance through a wider opening air intake for a pronounced and bold look. The rear exterior has a wider, more horizontal stance with a lower height. New oval, large diameter, exhaust tips accent a powerful presence. Larger wheels and tires (17-inch) add to the aggressive demeanor of the S2000. Headlights and taillights have been reconfigured with triple beam designs (instead of dual beam designs) that enhance an already-sophisticated appearance.

Honda S2000 Body Features

  • Electrically powered soft top
  • Cockpit air deflector
  • Integrated roll bars
  • High-intensity discharge (HID) projector-type headlights
  • Lightweight 17-inch alloy wheels
  • Body-colored dual power mirrors
  • Dual exhaust
  • Impact-absorbing, 5-mph, body-colored bumpers

2004 Exterior Changes

The exterior has the following changes for 2004:

  • Front bumper design improves aerodynamic performance and uses a wide open air intake
  • Rear bumper design is lower to the ground and is accented by large-diameter dual oval exhaust tips
  • Triple Beam projector headlight design replaces dual beam headlight reflector headlight design.
  • Triple lamp LED taillight design replaces a traditional dual lamp setup.
  • Larger wheels and tires (17-inch) provide a more aggressive appearance while adding to overall performance
  • Spiral double horn replaces flat double horn
Body
2004 2003 Change
Aerodynamics Enhanced
5% improvement in Cd from new front bumper design
Body Rigidity Enhanced
Rigidity increased
Front Bumper Redesigned
New bumper and new triple-beam headlight design
Rear Bumper Redesigned
New bumper, triple beam LED taillights and oval exhaust tip
Weight (lbs.) 2835 2811 +24, attributable to new wheels and body rigidity increase
Exterior Dimensions
L x W x H (inches)
162.2 x 68.9 x 50.0 162.2 x 68.9 x 50.0 Same

Honda S2000 Exterior Dimensions

Inches Millimeters
Length: 162.2 4,120
Width: 68.9 1,750
Height: 50.0 1,270
Wheelbase: 94.5 2,400
Track, Front: 57.9 1,470
Track, Rear: 59.4 1,510
Pounds Kilograms
Curb Weight: 2,835 1,290
Weight Distribution (%, Front/Rear) 50/50

Exterior Styling and Design

The S2000’s styling is distinctive and presents a modern, dynamic look. Its long hood and wide front end create a visual impression of lowness and mass. The hoodline drops away to a low, strong nose shaped for minimal aerodynamic drag and good forward visibility.

The S2000’s clear-lens, triple beam headlights and exterior line sweep back from the leading edge of the fenders. The lamps are a high-intensity discharge (HID) projector type that cast a powerful, broad beam. Side reflectors, parking and directional lights are combined in the same units.

Circular internal projectors house the low beam (HID), parking light and front turn lamp. The high beam is a traditional reflector design.

The taillight design follows a similar triple beam theme with large, round multi-LED taillights set in clear-lens housings. LED lights are used on the stop lamps and parking lamps and side marker lamps. The reverse indicators and turn signal indicators are circular and use traditional incandescent lighting. The squarish side marker lamp uses two LED lights.

A small spoiler lip with an LED stoplight is integrated into the trailing edge of the trunk lid. Dual, chromed oval exhaust tips visually dominate the rear view of the car. The outside mirrors and door handles are body-colored. The S2000 badge on the front fender and Honda badges on the hood and trunk are the only identifying marks on the car.

In profile, the S2000 looks taut and aggressive. Its broad sides visually convey strength and mass. The gap between the outer sidewalls and the outer edges of the fenderwells has been minimized, giving the car a wide and stable look.

The main character line of the car rises from the headlights, along the top of the fender and the top of the door, to the high rear deck, for an aggressive, raked look. Sculpted lower side sills further enhance the car’s angular appearance, and serve to draw the eye to the S2000’s large, flared wheelwells and high-performance wheels and tires. The 17-inch aluminum-alloy wheels are an open, twin 5-spoke pattern that calls attention to the S2000’s large brake discs and calipers.

The S2000’s trunk volume is 5.0 cubic feet. A space-saver spare tire is stored on a shelf, separated from the rest of the trunk by the carpeted trunk liner. Fuel-tank capacity is 13.2 gallons.

Convertible Top

The S2000 features a power-operated, soft convertible top with a rear glass window. Pushing the switch on the center console opens or closes the top in about six seconds, and two manually operated latches at the top of the windshield hold it securely. When folded, the top stows compactly behind the cockpit. A soft boot cover snaps in place to protect the top. The rear glass window features a defogger.

Accessory Hardtop

A hardtop for the Honda S2000 is available as a genuine Honda Accessory. Constructed of lightweight aluminum, the hardtop includes a large glass rear window with a defogger and a simple attachment process. The top provides both reduced interior noise and an aggressive new look. Available in all factory S2000 colors, the top uses the same manufacturing and painting processes as used on the S2000 factory line to insure the highest quality and factory-look finish possible. The hardtop weighs 44 lbs. and can be removed by the customer.

Roll Bars and Air Deflector

The S2000’s roll bars combine with the car’s reinforced windshield frame to help form a protective area for the driver’s and passenger’s heads in the event of a rollover. A clear acrylic panel is located between the driver’s and passenger’s roll bars and acts as a wind deflector to help reduce cockpit turbulence.

NVH Features

Measures employed on the S2000 to minimize and control NVH (noise, vibration and harshness) include vibration-absorbing engine mounts and suspension bushings, resonance-damping chambers in the intake and exhaust systems and soundproof materials applied to the floor, floor tunnel and trunk.

Exterior Colors

The 2004 S2000 features the following colors:

Exterior Color Interior Trim
Grand Prix White Light Tan
New Formula Red Black
Sebring Silver Metallic Black or Black and Red
Silverstone Metallic Black or Black and Red
Berlina Black Black
Rio Yellow Pearl Black
Suzuka Blue Pearl Blue

2004 Honda S2000 — Chassis

A front-engine/rear-wheel-drive configuration is used for the S2000. This “classic” layout is widely regarded for its excellent handling characteristics and direct, linear response to control inputs from steering, brakes and throttle.

Steering is by an electrically assisted, power rack-and-pinion system. The braking system uses 4-wheel discs and ABS. The system has been specially engineered for optimum efficiency, feedback and control.

New for 2004

Objectives for enhancing the 2004 S2000 chassis included simultaneously improving both at-the-limit track performance and the street performance during everyday driving conditions. Honda engineers re-visited the performance of the tires and suspension to improve overall handling of the S2000 and enhance “limit controllability.” To accomplish this, the tire size was increased, body rigidity improved, rear suspension bump steer qualities minimized, and the rear roll center was lowered.

Significant changes include:

  • Revised spring, shock absorber and stabilizer bar rates
  • 17-inch wheels and tires (increase from 16-inch)
  • Optimized rear toe settings
  • Enhanced suspension bushings
  • Revised Electrically Powered Steering (EPS) programming with optimized steering gearbox ratios and enhanced steering bushing rigidity
  • Body rigidity increased
  • Brake pedal rigidity and build-up feel increased
  • Brake pads upgraded to enhance brake fade durability and master cylinder power ratio optimized

2004 S2000 Suspension Features

The following Honda-designed chassis features contribute to the S2000’s exceptional handling and response:

  • 50/50(front/rear) weight distribution
  • Entire drivetrain located behind the centerline of the front axle (front mid-engine layout). This helps lower the vehicle’s center of gravity and helps to centralize vehicle mass, resulting in a low yaw moment and more responsive vehicle behavior
  • Wide track (57.8 in. front/59.4 in. rear) contributes to vehicle stability and chassis rigidity
  • Highly rigid “high X-bone frame”
  • Compact, highly rigid 4-wheel “in-wheel” double wishbone suspension allows for low hoodline
  • Mono-tube shock absorbers
  • Electric power steering system
  • Four-wheel disc brakes (11.8-in. vented front/11.1-in. solid rear), with 3- channel ABS
  • Limited-slip differential

2004 Honda S2000 vs. 2003 Honda S2000 Suspension Specifications

Suspension
2004 2003 Change/Notes
Wheels (inches) Front: 17×7.0
Rear: 17×8.5
Front: 16×6.5
Rear: 16×7.5
Front: + 1×0.5 (new wheel design)
Rear: + 1×1 (new wheel design)
Tires Front: P215/45R17
Rear: P245/40R17
Front: P205/55R16
Rear: P225/50R16
+15/10R1
+20/10R1
Springs New Setting
Front: Increased spring rate 6.7
Rear: Decreased spring rate 10%
Shock Absorbers New Setting
Tuned for new suspension settings
Stabilizer Bars (mm) Front: 26.5x t4.5
Rear: 25.4 x t4.5
Front: 26.5x t4.5
Rear: 27.2 x t4.5
Front: Same
Rear: -1.8
Brake Pads Jurid632(front) NF71 Solid pedal feel and increased resistance to brake fade
Steering Gear Ratio 14.9:1 13.8:1 Tuned to match new tire size

Benefits from Suspension Changes

  • Improved cornering grip
  • Body torsional rigidity increased for enhanced vehicle stability
  • Greater stability over road disturbances
  • Enhanced stability on wet surfaces
  • Linear steering feel increased with reprogrammed EPS system
  • Dynamic braking qualities improved

50/50 Weight Distribution

Honda engineers wanted the S2000 to have a balanced 50/50(front-to-rear) weight distribution, considered ideal for a front-engine rear-wheel-drive roadster. To accomplish this, and also lower the center of gravity, Honda engineers placed the engine and transmission low in the chassis and behind the front suspension.

Centralized Mass, Low Yaw Moment

Five decades of designing and building racing cars and motorcycles has taught Honda engineers the value of centralizing a vehicle’s mass-placing as much weight as possible close to the center of the vehicle. The result is what engineers call a “low polar moment of inertia,” which gives the vehicle a lower yaw moment-or less steering delay-which translates into quicker, more linear steering response.

Since light weight is a performance asset, Honda engineers also took great pains to design the S2000’s various chassis components to be as light and as compact as possible.

Highly Rigidity Body and X-Bone Frame

The S2000’s highly rigid body and frame are major contributors to its excellent handling characteristics. In fact, the S2000 exhibits bending and torsional rigidity (especially important for good handling) better than many closed-top sports cars.

For 2004, S2000 torsional body rigidity has been further increased by 10-percent in the front and 9-percent in the back through the use of four strategic sets of new reinforcements on the body and chassis.

  • Reinforcements have been added to the rear wheel house bulkhead
  • Reinforcements have been added to the front cross members
  • Brackets have been added to the front upper A-arms
  • A performance rod has been added to the front cross member

Benefits from the increase in body rigidity include decreased response lag during steering input, improved steering linearity through enhanced rigidity, and reduced body flex, which can diminish handling qualities.

Designing such a strong structure for the initial S2000 posed challenges because open-topped vehicles have inherently less bending and torsional rigidity. This problem can best be illustrated by removing the lid of a shoe box, and then twisting both its ends in opposite directions. The box twists easily. However, if you repeat the operation with the top in place, you immediately notice how much stiffer the enclosed box has become.

Similarly, unless an open-topped vehicle’s body and frame are reinforced, cornering grip and handling control will be compromised. A torsionally weak frame will store, then release suspension energy in an uncontrolled manner, resulting in less tire contact with the road and less steering precision and control.

In order to achieve the desired level of frame stiffness, Honda engineers designed a new monocoque body with a centralized backbone frame for the S2000. This backbone tunnel is enclosed by the floor and runs down the center of the cockpit, between the driver’s and passenger’s seat. Large side sills provide additional strength. Diagonally braced front and rear bulkheads contribute to tying the frame members together into a strong beam-like structure that resists bending and torsional forces. Crossmembers running under the driver’s and passenger’s seat add additional stiffness.

The front and rear portions of the central frame and the side sills tie into diagonal braces (X-braces) at the rear of the cockpit and at the front cowl. These X-members connect directly to the front and rear suspension subframes.

Despite the front subframe’s lightweight and compactness, its overall lateral rigidity is quite high. In addition, the engine mount structure has been designed so as to minimize the effect of lateral movement in the frame, when cornering.

The rear subframe is a three-dimensional structure consisting of hollow steel pipes that connect the rear side members and floor tunnel to the upper and lower arms of the rear suspension. A deep-section, rear crossmember ties the beams together and anchors the rear of the differential.

Compact (In-Wheel) 4-Wheel Double Wishbone Suspension

The 4-wheel, double wishbone suspension system used on the S2000 contributes greatly to its exceptional handling. The system consists of upper and lower wishbone arms at each wheel, with coil-over spring/damper units and anti-roll bars.

Since optimum weight distribution and balance are such important factors in achieving excellent handling characteristics for 2004 S2000, Honda engineers set the S2000’s engine and drivetrain as low and close to the center of the chassis as possible. Suspension geometry (toe, caster, camber, roll centers, etc.) also have a tremendous effect on handling and response, so Honda engineers designed the double wishbone suspension for the S2000 with optimum geometry in mind.

For 2004, modifications have been made to enhance performance at the limit, improve control and reduce unwanted sensitivity to internal and external forces during acceleration and braking. Overall suspension geometry has been enhanced by changing the initial rear toe and bump steer settings, lowering the roll center, and optimizing the shock absorbers, spring rates, stabilizer bar and body rigidity.

The system boasts many features found on road-racing suspension systems, including a compact layout, highly rigid construction, minimal unsprung weight, a low center of gravity and ideal geometry.

The entire S2000 suspension system is very space-efficient. Honda calls it an “in-wheel” suspension (the same design is used on the NSX). The S2000 “in-wheel” system contributes to assuring higher rigidity, as well as allowing for a low hoodline.

The suspension’s ductile iron wishbone arms are connected to the body via special rubber bushings, designed to minimize vibration without compromising suspension rigidity.

From a handling standpoint, the 2004 S2000 features improved steering response and accuracy with a more linear overall feel. At-the-limit controllability has also been enhanced along with vehicle stability under heavy accelerator on/off situations.

Wheel Alignment Values:

x 2004 2003
Front:
Toe Angle:
Camber Angle: – 0º 30′ – 0º 30′
Caster Angle:
Rear:
Toe Angle: – 0º 10′ – 0º 19′
Camber Angle: – 1º 30′ – 1º 30′

A 1.04×0.18-inch (26.5×4.5mm) front stabilizer bar and a 1.00×0.18-inch (25.4×4.5mm) rear bar contribute to the S2000’s and enhanced steering linearity and quality. The bars connect to their respective suspension arms via ball-jointed links.

Mono-Tube Shock Absorbers

The S2000’s mono-tube shock absorbers help minimize body roll and contribute to rapid weight transfer, resulting in more neutral cornering behavior and improved power transfer characteristics. They are also less harsh and better damp body vibration, which gives the chassis a more rigid feel. The rear shock absorbers, which feature large remote reservoirs, are attached to the lower wishbones, leaving more space available for the folding top and space-saver spare tire. The 2004 S2000, with the improvement of damping forces, reduces the feel of road disturbance while maintaining ride quality.

Electric Power Steering (EPS) System

The S2000 uses an electrically assisted power steering system in place of the more commonly used hydraulically assisted system. The electric system (first used on the high-performance Acura NSX), offers numerous advantages. The S2000 system is simpler and more compact (there is no need for a pump and hoses) and the power loss is minimized. The system’s compactness and simplicity also offer more design freedom. The system is also smoother and more responsive to driver input, and more communicative to the driver.

The system consists of a toothed rack and pinion gear, with a microprocessor-controlled, coaxial electric motor assisting the rack. The microprocessor senses vehicle speed and steering torque and is programmed to vary boost accordingly, providing more boost at low speeds and progressively less at higher speeds. Failure warning, self-diagnosis and self-protection functions are built into the system.

To achieve higher performance, enhancements have been made to the steering system that match the new tire sizes, suspension settings and body rigidity specifications. Also, the rigidity of the steering mount bushings have been increased and the EPS computer has been reprogrammed, resulting in a more linear steering feel.

High-Performance, 4-Wheel Disc Braking System

Honda engineers designed the S2000’s brake system to deliver braking performance consistent with the vehicle’s other high-performance capabilities. In addition, they wanted the system to be very direct, with a firm pedal feel that enhanced the driver’s braking control.

The heart of the system is its four large-brake disc brakes. Front rotor diameter is 11.8 inches (300 mm) and the rear diameter is 11.1 inches (282 mm). The front rotors are also vented for added cooling, while the rear discs are solid. Brake rotors and calipers are cast iron.

The brake calipers are large, highly rigid, cast-iron units. Front piston diameter is 54 mm, and the rear pistons are 40 mm in diameter. The front pad material is Jurid632, a high-performance, low steel, fade-resistant type that enhances the brake pedal’s solid feel and helps increase resistance to brake fade. Brake-pad area is 42 square centimeters for the front pads and 27.9 square centimeters for the rear-brake pads.

A 7.8-inch, tandem-vacuum servo-assist unit is used because it offers the best

balance between pedal feel (stiffness) and assist. Braking bias-front-to-rear-has also been optimized so that the front and rear brakes operate at maximum braking efficiency during heavy braking.

Anti-Lock Brake System (ABS)

The anti-lock braking system (ABS) is a compact type that incorporates the solenoid valve, motor and ECU into the modulator body, thereby saving both space and weight. The ABS system is a four-sensor, three-channel system with a speed sensor located at each wheel. There is a separate channel for each front wheel and the rear wheels share a common third channel. This is a “select-low” system, meaning the system controls both rear-wheel slave cylinders together when it senses incipient wheel lockup in either wheel.

The system uses the memory capacity of the system’s Electronic Control Unit (ECU) and allows the system to better estimate vehicle speed, which gives it better control in the lower-slip range. This contributes to superior braking efficiency and stability. For the 2004 S2000, with improvement of both hardware and software in the compact ABS modulator, memory capacity has increased and new program logic has been added which enhances braking efficiency and reduces the weight of the system.

Wheels and Tires

Larger wheel and tires for the 2004 S2000 improve overall grip and cornering performance. The S2000 features Bridgestone Potenza RE 050 215/45R 17 87W front tires, mounted on 17 x 7.0 jj aluminum-alloy wheels. The rear tires are 245/40R 17 91W and are mounted on 17 x 8.5 jj aluminum-alloy wheels. A space-saver spare tire is in the trunk.

Scroll to Top